2 PK Pentek DGD-7525 Sediment Water Filter 10" x 4-1/2" New 155355-43
This Pentek DGD-5005 spun polypropylene filter cartridge reduces sand, silt,scale, and rust particles in residential, commercial, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges. The nominal filtration rating of the pre-filterlayer is 50 microns, and the rating of the post-filter layer is 5 microns. The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1pound per square inch (psi) at a flow rate of 10 gallons per minute (gpm), and operates over a temperature range of 40 to 145 degrees F (4.4to 62.8 degrees C). This spun polypropylene filter cartridge meets National Sanitation Foundation/American National Standards Institute (NSF/ANSI) standard 42 for quality assurance, and is used for treatment of residential, commercial, and municipal drinking water.
Nominal filtration rating (pre-filter)
Nominal filtration rating (post-filter)
Initial pressure drop at 10 gpm
40 to 145 degrees F (4.4 to 62.8 degrees C)
Maximum dimensions (H x W)
10 x 4-1/2 inches (254 x 114 mm)
NSF/ANSI standard 42
The nominal filtration rating is for a particle removal efficiency of 85%.
His height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Water filters remove undesirable particles, chemicals, and microorganisms from water by meansof a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization. For most residential, commercial, and industrial applications, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. The performance of filters ismeasured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, the maximum flow rate, and the amount of water that can be filtered before the filter must be replaced.Water filters are used in a wide range of applications, including drinking water purification, swimming pools, industrial processes, and irrigation, among others.
Pentair manufactures industrial, commercial, and residential water filtration components and systems. Thecompany, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization (ISO) standards 9001 and 14001 for quality assurance.
Reduces sand, silt, scale, and rust particles in residential, commercial, and municipal drinking water
Combines two separate gradient layers for higher efficiency and dirt-loading capacity
Spun polypropylene for resistance to chemicals and bacteria
Initial pressure drop of less than 1 psi at a flow rate of 10 gpm
Temperature range of 40 to 145 degrees F (4.4 to 62.8 degrees C).
Manufacturer: Pentair Industries
Weight: 0.85 pounds
Ourstandard shipping service is free, your order will be processed within 3-4 business days after your payment. Transit time varies from 2-5 business days.
Expedited shipping takes 2-3 business days.
One Day shipping takes 1-2 business days and usually ships within 12 hours.
We only ship within the continental USA, we do notship to Alaska, Hawaii, Puerto Rico, APO addresses or any other USA territory.
We do not ship internationally.
Weonly ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time.
We are not responsible for undeliverable addresses.
Ifyou have a problem or question regarding your transaction please contact us before leaving any type of feedback. We will work with you to resolve any problem you may have.
Dueto the large number of feedback we receive, our automated system will leave feedback for you as soon as we receive your payment.
We offer a 14 day return policy from checkout winning date.
An RMA number is required for all returns. Message us for return instructions. Items returned without a RMA number will not be processed.
Items defective upon receipt must be packagedin their retail packaging as if new and returned with a detailed description of the problem.
Return shipping fees are not refundable.
We reserve the right to decline any returns if the above guidelines are not followed.