155398-43 NCP-BB Pentek Whole House Filter Replacement Cartridge 10 Micro
This Pentek NCP-BB carbon-impregnated polyester filter cartridge reduces sediment and chlorine taste and odor in residential and municipal drinking water. It has a nominal filtration rating of 10 microns at an efficiency of 85%. The filter will reduce free available chlorine (FAC) at 2 parts per million (ppm) by at least 50% in up to 500 gallons at a flow rate of 2 gallons per minute (gpm). The cartridge is made of carbon-impregnated polyester media pleated around a rigid polypropylene core with plastisol end caps for strength and resistance to bacteria. It has an initial pressure drop of 2 pounds per square inch (psi) at a recommended flow rate of 8 gallons per minute (gpm), and operates over a temperature range of 40 to 125 degrees F (4.4 to 51.7 degrees C). This filter cartridge is for use in rural, residential, and municipal drinking water purification.SpecificationsNominal filtration rating 10 micronsInitial pressure drop at 8 gpm 2 psiChlorine reduction capacity 500 gallons at 2 gpmOperatingtemperature range 40 to 125 degrees F (4.4 to 51.7 degrees C)Maximum dimensions (H x W) 9-3/4 x 4-1/2 inches (248 x 114 mm)The nominal filtration rating is for a particle removal efficiency of 85%. Chlorine reduction capacity is the minimum total amount of water for which the free available chlorine (FAC) at a concentration of 2 ppm is reduced by at least 50%.H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization.