6 Pack Pentek GS-10RO-B 10" x 2" inline Water Filter 255521-43 New"
6 GE 36 GPD RO Reverse Osmosis Membrane TFM-36
12 Pentek EP-10 5 Micron Carbon Block Filter Cartridge 155531-43 12 Pack
12 Pentek P5 filters 155014-43
You are purchasing 36 pieces of the filters.
EP Series carbon briquette cartridges are manufactured using a patented process that yields a cartridge with a nominal 5-micron filtration rating, high dirt-holding capacity. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop.
These cartridges are protected by Endurawrap®, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges.
EP Series cartridges are manufactured entirely from FDA-compliant materials making them an ideal choice for a wide range of residential, food service, commercial and industrial applications.
P Series cartridges are manufactured from pure 100% polypropylene fibers. The fibers have been carefully spun together to form a true gradient density from outer to inner surfaces.
P Series cartridges are designed for purity. They will not impart taste, odor or color to the liquid being filtered when used within the recommended temperature limit. Additionally, the polypropylene construction provides superior chemical resistance and is not prone to bacterial attack.
The coreless strength of the cartridges is achieved by sintering the many fibers into a solid matrix.
P Series cartridges are available in a wide array of sizes and micron ratings to accommodate all of your filtration needs.
P5 is 5 Micron.
Pentek® Traditional In-Line filters feature coconut shell, granular activated carbon, and are designed to reduce unwanted taste, odor and chlorine taste and odor.
All Traditional In-Line filters include a durable, injection molded polypropylene body and cap, pre- and post-filter. They are pressure rated to 125 psi.
Traditional In-Line filters are an ideal choice for post-RO, under-sink, ice-maker and food service applications.
This Standard Size Reverse Osmosis Membrane fits in a standard membrane housing like the one on the RO unit shown here.
The same standard membrane housing can accommodate RO membranes with capacities ranging between 18-100 gallons per day (GPD).
Specifications are based on 500 mg/L NaCl solution at 65 psi net pressure (4.1 bar), 77°F (25°C), 15% recovery after 24 hours. Individual element flux may vary ± 15%.
If you would like to change your membrane to a capacity other than what was originally in your Reverse Osmosis System, you must change the drain flow control also. The membrane and drain flow restrictor are sized to go together.
- Pentek is the largest brand in the filtration industry
- Pentek is the originator of carbon block production technology
- Pentek is the largest producer of carbon blocks worldwide